20–40 MINUTE MODULAR BUILD

Assembly Guide

Your 60" × 30" (152 × 76 cm) TimerWood XL Built-In Desk is engineered for a clean, straightforward build. With precision-milled 16 mm panels and pre-drilled cam-lock hardware, you can go from box to rock-solid workstation in under 40 minutes.

TimerWood XL Built-In Desk Assembly Guide
BEFORE YOU START

Engineered for Effortless Setup

Whether you chose the Matte Black or Matte White edition, every TimerWood XL desk arrives with pre-aligned architectural side panels and complete mounting hardware. Follow these four preparation essentials before locking the frame together.

Clear 60" × 30" Area

Assemble on a soft rug or flattening cardboard to protect the 16 mm melamine finish.

Two-Person Flip

One person can assemble the panels, but use two people when lifting the 152 cm desk upright.

Hand Tools Only

Use the included Allen key and a Phillips screwdriver—avoid high-torque power drills.

Hardware Inventory

Group your cam locks, dowels, and protective floor glides before starting Step 1.

TimerWood XL Architectural Panel Construction
STEP-BY-STEP GUIDE

4 Steps to Your XL Desk

STEP 01

Prep the 60" Desktop

Lay the 152 × 76 cm top face-down on a padded surface and thread in the cam pins and wooden dowels.

STEP 02

Lock Side Panels

Slot both precision-cut 29" (74 cm) architectural side panels into place and turn the cam locks clockwise.

STEP 03

Fit Support & Tray

Fasten the structural rear cross-beam and open cable tray, preserving the full 65–70 cm legroom clearance.

STEP 04

Flip & Level Feet

Attach the protective floor glides, lift the desk upright with a partner, and level it on your floor.

TimerWood XL Assembled 60x30 Workstation Specs
FINAL INSPECTION

Assembled Specs & Post-Build Check

Once standing, your TimerWood XL is ready to support dual 27-inch monitors, a 34"–49" curved ultrawide, or a full gaming battlestation. Verify these final measurements and torque checks before loading your gear.

60" × 30" Surface

152 cm width by 76 cm depth for healthy viewing distance and arm support.

29" Ergonomic Height

74 cm total height with 65–70 cm of unobstructed under-desk chair clearance.

Clamp & Mount Ready

Rear clearance accommodates monitor arms, mic booms, and power routing.

14-Day Re-Tighten

Give all cam locks a quick quarter-turn check after two weeks of daily use.

Shopping Cart
Scroll to Top